NOTE: THIS PAGE IS FOR REFERENCE PURPOSES ONLY.
WE ARE NOT CURRENTLY SELLING THESE ITEMS.
The original page 9 from the Zebra Systems 1985 Catalog is shown below this reprint of the information.
PROTOCARDS & CONNECTORS
|
TS2068 |
 |
PROTOTYPING BOARDS C111 & C211 are printed circuit boards specifically patterned for breadboarding on the TS1000 and TS2068 respectively. Both boards are made of high- quality G10 glass-epoxy material, have solder masks to minimize the possibility of soldering shorts in the connector area, are solder flux coated for easy soldering, and are silk screened to make identifying the power bus and mating-connector slot positions apparent. The C211 is wider than the C111 to accommodate the wider TS2028 connectors. At the bottom of each C111 is a conductor pattern to match with edge connector C110. Similarly, C112 has a longer pattern which can match with either the C110 or the longer C210. Both boards feature breadboard areas with over 1000 holes drilled on 0.1 inch spacing to accommodate integrated circuits and other electronic parts. The copper foil pattern provides for one power and one ground bus to make wiring efficient.
EDGE CONNECTORS C110 & C210 are female solder-tail edge connectors with lengths and keys to match the TS1000 and TS2068. They have custom labels identifying each pin number and the corresponding signal names for the TS1000 or TS2068. You will find these labels save you time and help prevent wiring errors.
EXPANSION CONNECTORS C112 & C212 are solder tinned printed circuit boards with 0.1 inch edge finger patterns on two sides and with a 0.070 inch notch in the proper key position for their respective computers. These connectors can be used behind your protocards to extend your computer bus to other peripherals such as modems, printers, and RAM Packs.
.
